FiberLight® Fiber Optic Light

Product Details Ordering Information Download Materials Related video Application Cases

The FiberLight fiber-optic lamp is a compact ultraviolet–visible light source designed specifically for mobile spectroscopy applications and various types of low-power handheld devices. The FiberLight features a continuous spectrum that covers the entire range from vacuum ultraviolet to near-infrared.

The FiberLight system is a complete UV-Vis light source system that integrates a transmission-designed deuterium lamp, a 0.25 W tungsten lamp, a shutter, an optical system, and an SMA 905 connector in a single unit. All components are mounted on an integrated circuit board powered by a 12 Vdc/600 mA power supply. The deuterium lamp, tungsten lamp, and shutter can be independently controlled via TTL signals.

FiberLight is powered by an external power source, making it an ideal light source for applications with limited space in miniaturized instruments, portable devices, or battery-powered equipment.

FiberLight Fiber Optic Lamp Lifetime Characteristics

Comparison of spectral distributions

| Product Advantages

The following characteristics of this light source pave the way for new solutions in compact spectroscopic instruments and UV-Vis optics:

Compact in size
Low power consumption
Instant boot-up, instant stability
Loop operation
Longer service life, up to 3 years.
Both the light and the shutter can be controlled independently.
Easily couples to optical fibers, enabling effortless measurement of cells and capillaries.
External control
Low heat generation

| Application areas

As an ideal light source, FiberLight® D2 can be used in instruments with limited space—whether the instrument is stationary, portable/handheld, or even battery-powered. Its features of low power consumption, compact size, and ease of operation open up new possibilities for instrument designers.

Laboratory: UV-Vis Spectroscopy Analysis
Environment: Water quality monitoring, wastewater analysis, marine chemistry, bioassays, air quality monitoring
Process Control
Spectral calibration

| Technical Parameters

	Standard FiberLight DTM 6/10, 6/11, 6/17, 6/20, 6/50

Spectral distribution	200 - 1100 nm Optional 185 - 1100 nm
Power consumption	6 Wax
Power requirements	12 Vdc / 0.6 Adc
Working environment temperature	5 - 35°C
Relative humidity	Max. 90%, non-condensing
Size (Long) x Wide x High)	157x55x37 mm DTM 6/17: 105 x 36 x 35 mm, DTM 6/20: 123 x 36 x 35 mm
Weight	130 g
Shutter	Yes
Tungsten lamp	Yes
External control	Independent switch for lamps (deuterium lamp, tungsten lamp) Shutter opens, closes Apply 12 Vdc The power supply voltage is green. LED Light up
Emitting light	Focused beam or parallel beam
Fiber diameter	200 µm, 400 µm, 600 µm
Fiber optic interface	SMA 905
Numerical aperture NA	Deuterium lamp 0.245 tungsten lamp 0.057
Heat dissipation	Not needed
Spectral distribution	200 - 400 nm
Window material	Fused quartz, fused synthetic quartz
Light output (radiant intensity)	≥ 5 × 10⁻⁸ W/sr at 240 nm
Stability	≤ 1 × 10⁻³ AU
Drifting	≤ 0.25%/h
Excitation frequency	250 kHz
Operating voltage	About 1kV
Service life *	≥ 1000 Hour @ 240 nm (50 %) Intensity attenuation )
Power consumption	About 5 Wax
Spectral distribution	400 - 1100 nm
Voltage	5 Vdc
Current	45 mAdc
Typical service life	≥ 2000 Hour

| Replace the lamp holder

Applicable FiberLight Type	DTM6/10	DTM6/10S	DTM6/50	DTM6/50S
Replace lamp holder type	DTL6/10	DTL6/10S	DTL6/50	DTL6/50S
Item number	45006253	80000756	45006266	80001018
Product image
Aperture size	1.0 mm	1.0 mm	0.5 mm	0.5 mm
Optical window material	Fused quartz	Fused synthetic quartz	Fused quartz	Fused synthetic quartz
Spectral range	200 - 1100 nm	185 - 1100 nm	200 - 1100 nm	185 - 1100 nm
Recommended fiber optics	400-600 µm	400-600 µm	200–600 µm	200–600 µm